STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Color: | Black |
| Application: | Retaining Wall, Steep Slop, Dam, Road Base |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Index Properties | |||
| Properties | Units | MD Values1 | XMD Values1 |
| Aperture Dimensions | mm (in.) | 25 (1.0) | 33 (1.3) |
| Minimum Rib Thickness | mm (in.) | 0.76(0.03) | 0.76 (0.03) |
| Tensile Strength at 2% strain | kN/m (lb/ft.) | 4.1 (280) | 6.6(450) |
| Tensile Strength at 5% strain | kN/m (lb/ft.) | 8.5 (580) | 13.4 (920) |
| Ultimate Tensile Strength | kN/m (lb/ft.) | 12.4 (850) | 19.0 (1,300) |
| Structural Properties | |||
| Junction Efficiency | % | MD Values1 | |
| Flexural stiffness | mg-cm | 250.000 | |
| Aperture stability | m-N/deg | 0.32 | |
| Durability | |||
| Resistance to Installation Damage | %SC/%SW/%GP | 95/93/90 | |
| Resistance to Long Term Degradation | % | 100 | |
| Resistance to UV Degradation | % | 100 | |
| Dimensions | |||
| Roll Sizes | m (ft.) | 3.0x75.0(9.8x246); 4.0x75.0(13.1x246) | |
| Index Properties | |||||||
| Properties | Units | 1100 | 1400 | 1500 | 1600 | 1700 | 1800 |
| Tensile Strength at 5% Strain | kN/m (lb/ft.) | 27(1,850) | 31(2,130) | 52 (3,560) | 58 (3,980) | 75 (5,140) | 95(6,510) |
| Ultimate Tensile Strength | kN/m (lb/ft.) | 58(3,970) | 70(4,800) | 114 (7,810) | 144(9,870) | 175 (11,990) | 210(14,390) |
| Junction Strength | kN/m (lb/ft.) | 54(3.690) | 66(4,520) | 105(7,200) | 135 (9,250) | 160(10,970) | 180(12,340) |
| Flexural Stiffness | (mg-cm) | 500.000 | 730,000 | 5,100,000 | 6,000,000 | 9.075.000 | 9.500,000 |
| Load Capacity | |||||||
| Properties | Units | 1100 | 1400 | 1500 | 1600 | 1700 | 1800 |
| Maximum Alowable (Design)strength |
kN/m (lb/ft.) | 21.2 (1,450) | 25.6(1,760) | 41.8 (2.860) | 52.7 (3,620) | 64.1(4,390) | 74.1(5,080) |
| Index properties | Longitudinal | Diagonal | Transverse | General |
|---|---|---|---|---|
| Rib pitch, mm (in.) | 40 (1.60) | 40 (1.60) | ||
| Mid-rib depth, mm (in.) | 1.3 (0.05) | 1.2 (0.05) | ||
| Mid-rib width, mm (in.) | 0.9 (0.04) | 1.2 (0.05) | ||
| Rib shape | rectangular | |||
| Aperture shape | triangular |
| Width | commonly up to 6 m |
| Raw material | high strength steel |
| Coating materials | polyethylene or polypropylene |
| Features | High strength, small deformation Good dimensional stability Strong bearing capacity High friction coefficient Low elongation rate at break |
){kind=link}